星期一, 10月 26, 2009

Nuendo 4 的各項問題與解答

Nuendo 4 和 Quicktime 犯沖的問題 
Directshow和Quicktime的比較 
用Folder Track解決 影片Lag的問題 
Quicktime影片置入後變短 

Nuendo 4.3的情形之下
Quicktime可安裝最新版 7.6.4
Codec編解碼可加裝  QT-Alt 1.68 or K-Lite codec pack latest
即可使用Direct Show 支援 QUicktime Video
但是 Direct Show 不支援一個以上的Video置入

有網友說 影片放的硬碟 要跟聲音的硬碟分開

[我已經測試驗證]
純Quicktime的音效剪輯
一開始先選擇Video Device的Quicktime的話  可置入一個以上的Quicktime Video 都能播


[我已經測試驗證]
純AVI的音效剪輯
一開始先選擇Video Device的DirectX的話  可置入一個以上的AVI Video 都能播



[以下是重要po文]


Posted: Thu Oct 08, 2009 12:19 am    Post subject:   

--------------------------------------------------------------------------------

thanks very much Max,

I just gave it a try and installed the 7.64 with Nuendo 4.3 and was able to open a session with a video that wouldn't work with Nuendo 4.2.2 and QT 7.6.
yay!

Best Regards
Ulf



Posted: Wed Feb 18, 2009 12:09 pm    Post subject:   

--------------------------------------------------------------------------------

.avi Cinepack Codec and .mov Photo Jpeg.
We have thousands of those projects and they are rock solid.




Fredo


PostPosted: Mon Feb 16, 2009 4:00 pm    Post subject:      Reply with quote
First of all: Forget DirectX. It's known to be buggy and is not recommended at all.
Weapon of choice vs Nuendo is Quicktime. Quicktime is a container, how ugly or blocky
it looks depends on the codec and resolution you use. Quicktime with PhotoJPEG
(.mov-files) or MotionJPEG (.avi-files) seems to work flawless and stable with fairly good
quality, as many people in this forum use it in a professional environment (me too).
(Using it with a BlackMagic Intensity video card you can even output FullHD via HDMI
without any problems).

[這段超重要]
Another pro on Quicktime is that it allows multiple videos
in the timeline, even rudimentary cutting is possible. DirectShow doesn't allow this.
I hope that helps.

Bye,
Eike



[用Folder Track解決 影片Lag的問題]

1.   Go to the preferences and disable the show event data on small tracks (or sth. similar... cannot remember).
Then shrink the size of the video track so that it is only a coloured bar (i.e. no grey boxes). Should work now.
2.   Try this: create a folder track and place the video track inside, than close the folder track.
It works for me.
Bye,
Marco.

星期二, 10月 13, 2009

史上最憤世嫉俗的錄音室

應該是全世界最大的Subwoofer吧...磚頭蓋的喔..請向下捲動 ..網友的反應是.. 這人花3,000,000 美元搞監聽和音響但是只花5,000美元作錄音 堪稱史上最憤世嫉俗的錄音室http://www.royaldevice.com/custom.htm

星期一, 10月 12, 2009

Nuendo在Windows 7 的進程 尚未公佈

繼蘋果雪豹的1394狀況外之後,業界又出現七夜怪談,Nuendo在Windows 7 的進程 尚未公佈 目前仍在測試階段 基本上很不負責 因為連預計進行的時程都沒有出現 這樣的訊息 人人都可以公佈吧 官方網站真是讓人大開眼界...
http://www.steinberg.net/en/company/steinberg_news/detailansicht/article/windows-7-and-os-x-106-support-872.html

[Processing攻頂日記]saveFrame("line-####.tif")

感謝 李家祥和林子邦兩位前輩深夜的相助
終於明白 saveframe()的用法
其實 Processing的網站上早有記載
只是當時鴨子聽雷 彷彿從現在才真正開了扇小門鑽進去
原本是暑假前跟阿邦討教 如何將這個openGL的黑暗美美動畫存起來
D:\processing-1.0.7\examples\Libraries\OpenGL\Esfera

我原本是希望即時錄下來成為Video檔(Quicktime什麼的)
記得搞了很久 也到Processing社群去問人
是阿邦修改這個範本 為我按下啟動開關
但直到昨晚 看到 Substrate那麼動人的影像時
突然衝動到希望錄下來 所以試圖回想阿邦當時的作法
上網去找 發現Output/Image 這個地方有點印象
http://www.processing.org/reference/saveFrame_.html
所以就自己亂試....
但一直沒有順利存下每一格
有時只存到一格 有時是紅色警告 根本動不了
最後才領悟到 saveframe() 必須放在 draw(){}整個結束之前
也就是"}"之前 以這個為例:
void draw() {
// crack all cracks
for (int n=0;n cracks[n].move();
}
saveFrame("line-####.tif");
}

成功的時候 發現程式的結構好乾淨 好秩序
天生是個美學的形式
吼吼~~ 大家一起加油吧~~

星期二, 10月 06, 2009

雪豹的Firewire 和Bootcamp的1394 就治好了

在OSX開機 用Disk utility進行[Repair Disk Permissions], 之後, 雪豹的Firewire 和Bootcamp的1394 就治好了 這是真的..我今天試出來的

星期日, 10月 04, 2009

我不認為雪豹的 firewire 1394大恐慌能等到年底才解決

我不認為雪豹的1394大恐慌能等到年底才解決
Firewire Snow Leopard is a disaster

http://discussions.apple.com/thread.jspa?threadID=2136580&tstart=0&messageID=10332922#10332922

星期五, 10月 02, 2009